Guild’s low cost, semi-automatic shearwelder for extra wide, extra thick coils
- Recommended for Coils up to 72” wide & .060” to .500” thick
- GUILD Designs and manufactures a Complete line of Shearwelders and Strip Accumulators
- GUILD’s model DMI Semi-Automatic Shearwelder is designed for applications where the coils are either too thick or too wide to be conveniently positioned by hand from the shear to the weld station. It is a unique compromise between a manual and an automatic machine.
- The shear and weld station are mounted on a common indexing table which indexes the shear out of position and moves the weld carriage over the sheared ends automatically.
- The shear and weld station are mounted on a common indexing table which indexes the shear out of position and moves the weld carriage over the sheared ends automatically.
- Welding is automatic by either the TIG or MIG weld processes, depending on the material, and features the exclusive GUILD-MATIC adjustable gap control which permits the operator to pre-select the proper gap for each material and gauge to be welded. The gap is obtained without having to move the strip.
- Edge alignment guides normally provided are hand crank operated centerline adjustment plates, although powered guides are also available as an option.
- Since welding is fully automatic, trained operators are not required. And, as with every GUILD Shearwelder, the Model DMI is completely pre-wired and tested in our facility prior to shipment to our customers.